Broward County · High Velocity Hurricane Zone
Roof Repair and Replacement in Pompano Beach
Two different roofing markets in one city: older single-family inland, and a wave of oceanfront towers built in the last decade. The beachfront work is almost entirely low-slope with heavy salt exposure, which shortens the life of fasteners and terminations well before the membrane.
Photographs and a written scope. If the honest answer is that it can wait another season, you will get that answer.
Licensed
General contractor, licensed in the state of Florida
HVHZ
Miami-Dade and Broward product approval, done properly
GC
A general contractor, so the structure below is our problem too
25%
The code rule that decides repair vs. replace
Code
What governs your roof here
Product approval
Miami-Dade Notice of Acceptance
Broward County sits inside the High Velocity Hurricane Zone. Every component — tile, underlayment, fasteners, membrane — must carry a Miami-Dade NOA. Ask any bidder for the numbers.
Typical roofs here
Inland tile and shingle; oceanfront low-slope
Roof type decides the failure mode. Tile hides a failing underlayment for years; low-slope tells you immediately by holding water. Neither is worse — they just need looking at differently.
Services
What we do in Pompano Beach
Roof Leak Repair
A ceiling stain shows where water landed, not where it got in. Finding the entry point is the job.
Read more →
Tile Roof Repair
Tile takes the wind and sheds the rain, but the underlayment beneath it is what keeps water out.
Read more →
Metal Roof Repair
Metal panels rarely fail in the field. It is the seams, end laps and fasteners that work loose.
Read more →
Shingle Roof Repair
Shingles give up at the edges and corners first, so a roof losing them twice is telling you something.
Read more →
Flat & Low-Slope Roofing
On a low-slope roof, wherever water is still standing two days after rain is where the problem is.
Read more →
Storm & Hurricane Damage
A roof can lose its attachment without losing a tile. An assessment separates real damage from what merely looks bad.
Read more →
Local conditions
What actually fails in Pompano Beach
The failure we see
On the oceanfront towers the membrane usually outlives its own terminations — fasteners, edge metal and pitch pockets corrode first in salt air. Inland the failure is conventional: underlayment age on tile and shingle.
Working here
Tower work is scheduled around association approval and resident notice, not weather alone. Roof access on beachfront buildings is often a single stair or hoist point, and that sets the pace of the whole job.
None of that changes the price on its own. It changes what we look at first, and it is the difference between a scope written for Pompano Beach and a scope written for anywhere.
25%
The rule that decides your job
Florida limits how much of a roof can be repaired before the entire system has to be brought to current code. Which side of that line you fall on changes the job from a few thousand dollars to a full replacement — so it gets established first, in writing, rather than discovered after the tear-off.
FAQ
Common questions
- Is Pompano Beach in the High Velocity Hurricane Zone?
- Yes. Broward County is HVHZ, so every roofing product used on your house must carry a Miami-Dade Notice of Acceptance. A contractor who cannot produce the approval numbers has not planned the job properly.
- Do you pull the permit?
- Yes. We pull the permit with the authority having jurisdiction over your address and carry the job through inspection. A contractor asking you to pull an owner-builder permit for their work is a serious warning sign.
- What kind of roofs do you see most in Pompano Beach?
- Inland tile and shingle; oceanfront low-slope. That shapes the likely failure — a tile roof and a low-slope membrane fail in completely different ways and on different timescales.
- How quickly can you come out?
- Active leaks are triaged the same day where we can reach you. After a named storm the whole county calls at once and we will give you an honest queue rather than a time we cannot make.
- Do you work with HOAs and condo associations?
- Regularly. Association work runs on architectural approval and a reserve schedule rather than on a homeowner decision, and the approval usually takes longer than the roof does.
Nearby
HVHZ
Fort Lauderdale
Our home city, and a genuine mix: barrel tile on the mainland, flat and low-slope on the mid-century houses near Victoria Park, and metal appearing steadily on the newer waterfront builds. Broward is HVHZ, so every product on your roof needs a Miami-Dade Notice of Acceptance.
Read more →
HVHZ
Lighthouse Point
Canal-front houses with long-tenured owners, which is exactly the profile where a tile roof has looked fine for twenty-five years while the underlayment quietly reached the end of its life. Salt air on the canals is hard on exposed fasteners and metal trim.
Read more →
HVHZ
Coral Springs
Planned communities built largely between 1975 and 1995, which means a huge number of roofs of near-identical age reaching replacement together. Almost all are inside an HOA with architectural approval for color and profile, so the tile selection needs signing off before it is ordered.
Read more →
Next step
Book an inspection in Pompano Beach.
An inspection, photographs of what we found, and a written scope. If the honest answer is that it can wait another season, that is the answer you will get.